Product sheet
Description
This 2 beam anodized aluminium telescopic slide is providing a partial extension.
It includes a lock in: to open the drawer, you need to press on a latch.
Very slim, it is designed for light duty loads.
Drilling scheme
Standard closed lengths
| Extension |
on major axis |
on minor axis | Stock | CAD Files Add to cart | ||
| 150 mm | 70 mm | 7 kg | Contact us |  |
||
| 200 mm | 120 mm | 15 kg | Contact us | |
||
| 250 mm | 160 mm | 25 kg | Contact us | |
||
| 300 mm | 180 mm | 50 kg | Contact us | |
||
| 350 mm | 230 mm | 45 kg | Contact us | |
||
| 400 mm | 280 mm | 40 kg | Contact us | |
||
| 450 mm | 300 mm | 32 kg | Contact us | |
||
| 500 mm | 330 mm | 25 kg | Contact us | |
||
| 550 mm | 350 mm | 18 kg | Contact us | |
||
| 600 mm | 400 mm | 15 kg | Contact us | |
||
| 650 mm | 450 mm | 10 kg | Contact us | |
||
Technical informations
Applications
This slider is designed for simple, basic and cost conciouse light duty applications that require a relativly low number of cycles, suchs as small drawers, keyboards.Physically very light it can be used in aerospace applications.
Recommended operation temperature from -20 to 80°C
In most of the cases, only one slide with a latch is enough to lock the drawer, this makes the assembly easy to operate. In case of vehicule use, please contact us if you think about using a slide with a locking device.
Caution: The use of aluminum slides is not recommended within applications that have high levels of vibration. If you would like advice please do not hesitate to contact us.
Caution: due to the slim profile of this slide to avoid excess friction and increased deflection we recommended that it is used only in its major axis.
Caution: aluminium slides are not designed for intensively cycling use.
Note: It is not always possible to produce shorter length slides with locking systems and the fixing hole patterns may differ.
Attention: we do not recommend this model for use in vertical (up & down) applications.
Manufacture
Chambrelan produces this telescopic guide from anodised aluminium profiles. Its components are, polamid ball cages, rubber stoppers, white zinc plated latch, and 100C6 ball bearings greased with a high pressure grease.
Same models
This model has equivalent models, whose overall dimensions and the diagrams of drillings are close or identical:
