Tools :
D5S
This Reinforced 3 beams anodised aluminum slide, offers a full extension. It includes a synchronisation device to allow a sequential opening of the beams, which reduces the moving forces. Caution: It is imperative to observe the direction of assembly between the fixed and movable sliders. Strong, it encloses reinforced ball bearings that restricts twisting of the beams. It is intended for heavy loads in applications requiring high strength slides.
- Extension : 315 mm
- Load on minor axis : 49 kg
- Load on major axis : 30 kg
Options
Pictures
3D
Standard closed lengths
The characteristics given on this website correspond to standard manufacture or usual requirements. Our position as a manufacturer enables us to offer great flexibility in order to meet the most specific requirements.
Description
This Reinforced 3 beams anodised aluminum slide, offers a full extension.
It includes a synchronisation device to allow a sequential opening of the beams, which reduces the moving forces. Caution: It is imperative to observe the direction of assembly between the fixed and movable sliders.
Strong, it encloses reinforced ball bearings that restricts twisting of the beams.
It is intended for heavy loads in applications requiring high strength slides.
Applications
The guide rail is very strong, both in terms of its cold drawn hardened profiles and its end stops. It is intended for applications of heavy loads drawers or to withstand hard use. Being equipped with reinforcing ball bearings, it may also be flat mounted. Remember that a flat mounting induce significant deflection.
Recommended operating temperatures from -20 to 80°C.
This product can be used as average load drawer slides, machine guard guides, telescopic rod, bar or arm, generator slide, furniture slide, extendable table slide rail, horizontal suspended guidance or in some cases as in vertical guides.
Manufacture
Chambrelan produces this telescopic slide using extruded aluminum profiles.
Anti-corrosion standard coating is soft anodisation.
It has straight stops when opening and closing.
It has ball cages made of stainless steel.
Its ball bearings are made of stainless steel. It is greased with a white grease.
Chambrelan is specialized in the design and manufacturing of telescopic slides and rails for industrial applications: reinforced slides, linear slide bearings rail, bearings guide, steel, aluminum or stainless steel sliders, partial, full or over extension, heavy duty industrial drawers...
Greasings
- Standard slides are delivered slightly greased. We use a high pressure bearing grease for steel slides and a white grease for aluminum and stainless slides. Upon request, we can use food grease (compatible clean room) a high temperature grease a teflon free grease (for spray booths...) grease free mounting (although we do not advise this option)
A food safe grease, combined with stainless steel ball bearings, offers a cheap alternative to stainless steel slides.
Options
Manual lock
D5V lock opened: when extended, push the lock to close the slider.
D5F lock closed: when closed, push the lock to open the slider.
D5VF lock opened and closed: when extended, push the lock to close the slider, when closed, push the lock to open the slider.
In most cases, only one locking slide is required for the locking of the drawer to be achieved.
When mounting in vehicles, we invite you to contact us if you plan to use locking slides.
the presence of lock and latches makes some shorter lengths impossible to manufacture. Moreover some standard holes may not be present.
we do not recommend locking options for use in vertically mounted (guillotine) applications.
Surface treatment
Other treatments ensuring better corrosion resistance are also available. Do not hesitate to contact us.
This slide can be supplied with a hard anodization coating, which offers, in addition to corrosion resistance, an increased resistance to hammering of ball bearings. This option can be usefull in the case of applications subject to vibrations.
high temp use
- We do not recommend using this product outside the standard temperature range.
Development changes
the extension of this model can be decreased or increased up to 10%.
increased development reduces the maximum permissible load.
Vertical mounting
This slide can be mounted vertically. However, to avoid jamming, it is necessary to install, during production, additional stoppers to relocate the ball cages. It is therefore necessary to specify the type of installation requirements: downward or upward movement.
Same models
This model has equivalent models, whose overall dimensions and the diagrams of drillings are close or identical
- D53 - Telescopic slide, partial extension, Aluminium, Standard
- R53 - Telescopic slide, partial extension, Steel, Standard
- RA5R - Telescopic slide, total extension, Steel, Standard
- RA554 - Telescopic slide, super extension, Steel, Standard
- ST58 - Telescopic slide, partial extension, Stainless, Standard
- ST558 - Telescopic slide, super extension, Stainless, Standard
- E50-G52 - Linear rail with ball bearing runner,Steel,Standard
- ST50-GS52 - Linear rail with ball bearing runner,Stainless,Standard
- D52-BP53 - Linear rail with runner,Aluminium,Standard
- ST508 - Telescopic slide, total extension, Stainless, Standard