ST58

This reinforced 2 beas stainless steel telescopic slide, offers a partial extension.

  • Extension : 80 mm
  • Load on minor axis : 135 kg
  • Load on major axis : 75 kg

Option

Pictures


3D


Option :

Description

This reinforced 2 beas stainless steel telescopic slide, offers a partial extension.

Strong, it encloses reinforced ball bearings that restricts twisting of the beams.

It is intended for heavy loads in applications requiring a very strong slide.

Applications

The guide rail is very strong, both in terms of its cold drawn hardened profiles and its end stops. It is intended for applications of heavy loads drawers or to withstand hard use. Being equipped with reinforcing ball bearings, it may also be flat mounted. Remember that a flat mounting induce significant deflection.

Recommended operating temperatures from -20 to 80°C. After modifications during manufacturing, we can go from -50 to 250°C.

This product can be used as average load drawer slides, machine guard guides, telescopic rod, bar or arm, generator slide, furniture slide, extendable table slide rail, horizontal suspended guidance or in some cases as in vertical guides.

Manufacture

Chambrelan produces this telescopic slide using cold drawn stainless steel profiles.

Standard coating is electropolishing.

It has straight stops when opening and closing.

It has ball cages made of stainless steel.

Its ball bearings are made of stainless steel. It is greased with a white grease.

The thin profile requires a milling of the frame.

Chambrelan is specialized in the design and manufacturing of telescopic slides and rails for industrial applications: reinforced slides, linear slide bearings rail, bearings guide, steel, aluminum or stainless steel sliders, partial, full or over extension, heavy duty industrial drawers...

Greasings

  • Standard slides are delivered slightly greased. We use a high pressure bearing grease for steel slides and a white grease for aluminum and stainless slides. Upon request, we can use food grease (compatible clean room) a high temperature grease a teflon free grease (for spray booths...) grease free mounting (although we do not advise this option)

Options

Manual lock

ST58V - lock opened: when extended, push the lock to close the slider.

ST58F - lock closed: when closed, push the lock to open the slider.

ST58VF - lock opened and closed: when extended, push the lock to close the slider, when closed, push the lock to open the slider.

In most cases, only one locking slide is required for the locking of the drawer to be achieved.

When mounting in vehicles, we invite you to contact us if you plan to use locking slides.

the presence of lock and latches makes some shorter lengths impossible to manufacture. Moreover some standard holes may not be present.

we do not recommend locking options for use in vertically mounted (guillotine) applications.

Double extension

ST58DD - the slide opens from both sides. This can be used for transfer hatches.

The double extension option is incompatible with any locking system.

high temp use
  • Use in high temperature (furnace): This model can be used in high temperatures environments: up to 250°C. However, adjustments are necessary: - Additionnal play in the assembly to allow the expansion elements without blocking the slide - Use of high temperature grease - Removing of all plastic parts. These adjustments on the slides should be performed in the factory, it is important to warn us with price request or order and to allow a delay for manufacturig.
Development changes

the extension of this model can be decreased or increased up to 10%.

increased development reduces the maximum permissible load.

Vertical mounting

This slide can be mounted vertically. However, to avoid jamming, it is necessary to install, during production, additional stoppers to relocate the ball cages. It is therefore necessary to specify the type of installation requirements: downward or upward movement.

Drilling scheme

Download

Standard closed lengths

The characteristics given on this website correspond to standard manufacture or usual requirements. Our position as a manufacturer enables us to offer great flexibility in order to meet the most specific requirements.

MeasuresLoadsClosed lengthExtensionLoad per pair
on major axis
Load on minor axisStockPlease select
Longueur replié
200
Extension
80
Load on minor axis
75
Load per pair on major axis
135
20080135751
Longueur replié
250
Extension
130
Load on minor axis
75
Load per pair on major axis
135
250130135750
Longueur replié
300
Extension
180
Load on minor axis
75
Load per pair on major axis
135
300180135750
Longueur replié
350
Extension
230
Load on minor axis
72
Load per pair on major axis
135
3502301357213
Longueur replié
400
Extension
280
Load on minor axis
70
Load per pair on major axis
135
4002801357017
Longueur replié
450
Extension
310
Load on minor axis
68
Load per pair on major axis
150
4503101506811
Longueur replié
500
Extension
340
Load on minor axis
66
Load per pair on major axis
154
500340154661
Longueur replié
550
Extension
370
Load on minor axis
64
Load per pair on major axis
158
550370158640
Longueur replié
600
Extension
400
Load on minor axis
60
Load per pair on major axis
160
6004001606087
Longueur replié
650
Extension
430
Load on minor axis
58
Load per pair on major axis
160
650430160588
Longueur replié
700
Extension
480
Load on minor axis
57
Load per pair on major axis
158
700480158576
Longueur replié
750
Extension
510
Load on minor axis
56
Load per pair on major axis
156
750510156568
Longueur replié
800
Extension
540
Load on minor axis
55
Load per pair on major axis
150
800540150554
Longueur replié
850
Extension
570
Load on minor axis
54
Load per pair on major axis
144
850570144540
Longueur replié
900
Extension
600
Load on minor axis
52
Load per pair on major axis
136
900600136524
Longueur replié
1000
Extension
680
Load on minor axis
48
Load per pair on major axis
120
1000680120480
Longueur replié
1100
Extension
740
Load on minor axis
44
Load per pair on major axis
100
1100740100440
Longueur replié
1200
Extension
800
Load on minor axis
38
Load per pair on major axis
80
120080080380
Longueur replié
1300
Extension
880
Load on minor axis
33
Load per pair on major axis
60
130088060331
Longueur replié
1400
Extension
940
Load on minor axis
25
Load per pair on major axis
40
140094040250

A question?

Contact us for more information

Copyright 2017 CHAMBRELAN - Legal terms - Sitemap