This complete kit, ready for assembly, makes it possible to produce a drawer with a sliding and tilting partial extension, whose extension and tilting angle are easily adjustable. The pivot system makes the contents of drawers at shoulder height and above easily accessible for loads up to 100kg. 3 standard lengths are available from stock; other lengths are possible on request. It is economical, ready to use, quick to install, and reliable.
- Load on minor axis : 100 kg
E53GP, Kit for tilting sliding drawer
Presentation of the kit for tilting sliding drawer E53GP CHAMBRELAN
This complete system has been developed to solve the problem of easy access to the contents of a drawer located at a height. It is economical, ready to use, quick to install, and reliable. Ready for assembly, it creates a partial extension drawer system that slides and tilts (alias Slide and Tilt). The extension and tilting angle are easily adjustable by means of needle stops. The pivot system makes the contents of drawers, up to 100 kg, located at height accessible.
It is delivered as a complete kit for a drawer, ready for assembly, which contains all the necessary accessories: rails, aluminium runners, adjustable stops for the rails, end of stroke impact damping scrapers for the runners. The components are made of steel, aluminium, stainless steel and reinforced polyamide.
Three rail lengths are on stock in 550, 650 and 1050 mm length. The other lengths can be manufactured. The rails are delivered drilled and ready for set up. This sliding and tilting system is suitable for applications requiring heavy load guidance, up to 100 kg per drawer. The continuous operating temperature range is from -20°C to +80°C.
Options of the kit for sliding and tilting drawer E53GP/
- Rail of specific lengths and or holes according to plan,
- Mounting with stainless steel balls to obtain a very good corrosion resistance…
I can be used combined with CHAMBRELAN ergonomic slam lock handles :
Chambrelan, global telescopic ball bearing slides and industrial guide rails specialist, helps you:
Standard closed lengths
The characteristics given on this website correspond to standard manufacture or usual requirements. Our position as a manufacturer enables us to offer great flexibility in order to meet the most specific requirements.
This complete kit, ready for assembly, offers a partial extension drawer slide that tilts. The extension and the tilt angle are easily adjustable.
the pivot device gives an easy access to the content of high located drawers
It is delivered as a ready to assemble kit that contains all the necessary items for one drawer: rail and runner, aluminum pivot, stoppers, roller bearing. Materials are steel, stanless steel, aluminum and polyamide.
This slide and tilt slide is intended for applications of drawers of medium loads in high locations, and requiring easy and quick access. It is especially designed for firefighting vehicles to optimize space and maximize access.
Recommended operating temperatures from -20 to 80°C.
This system cannot be flat mounted.
Chambrelans production of this guid rail is based on the use of cold drawn steel profiles.
Its ball bearings are made of 100C6 chrome steel. It is greased with a high pressure grease.
Chambrelan is specialized in the design and manufacturing of telescopic slides and rails for industrial applications: reinforced slides, linear slide bearings rail, bearings guide, steel, aluminum or stainless steel sliders, partial, full or over extension, heavy duty industrial drawers...
- Standard slides are delivered slightly greased. We use a high pressure bearing grease for steel slides and a white grease for aluminum and stainless slides. Upon request, we can use food grease (compatible clean room) a high temperature grease a teflon free grease (for spray booths...) grease free mounting (although we do not advise this option)
A food safe grease, combined with stainless steel ball bearings, offers a cheap alternative to stainless steel slides.
It has no lock option so far.
Other treatments ensuring better corrosion resistance are also available. Do not hesitate to contact us.
A nitruration coating of the rail can be supplied, which offers, in addition to corrosion resistance, an increased resistance to hammering of ball bearings and a longer lifespan. This option can be usefull in the case of intensive use or applications subject to vibrations.
Stainless stell ball bearings mounting
It can be mounted with stainless steel balls to get a very good corrosion resistance, which in some cases can provide an economical alternative to stainless steel slides.
high temp use
- We do not recommend using this product outside the standard temperature range.