D402

This 2 beam anodised aluminum slide, offers a partial extension.

  • Extension : 70 mm
  • Load on minor axis : 13 kg
  • Load on major axis : 6 kg

Option

Pictures


3D


Option :

Description

This 2 beam anodised aluminum slide, offers a partial extension.

Very compact, its sliding action is particularly regular, smooth and quiet.

Very comptact it is intended for light duty loads.

Applications

This slide guide is intended for simple applications for light loads that require few cycles. it can be used as covers or guards on machine, retractable keyboards supports or drawers with small loads. Very light, it is particularly well suited for aerospace applications. It opens from both sides which makes possible transfer hatches for example.

Recommended operating temperatures from -20 to 80°C.

Installing these guides in applications with severe vibrations is not recommended: indentation of profiles by ball bearings might occure. Do not hesitate to contact us.

This slide is very compact, do not use flat mounted: increased risk of friction between beams during operation. In addition, a flat mounting will create significant deflection.

Mounting in the minor axis is not recommended as the sections could deform when under load increasing friction and possibly damaging the slide.

These slides are not designed to withstand intensive use.

This product can be used as a keyboard drawer, Slide-pan, telescopic rod, drawer slide, furniture slide, handling rail, suspended horizontal guidance, or in some cases, as vertical guide as guard door.

Manufacture

Chambrelan produces this telescopic slide using extruded aluminum profiles.

Anti-corrosion standard coating is soft anodisation.

It is equipped with polyamide stoppers when opening and rubber stoppers when closing.

It has ball cages made of polyamid.

Its ball bearings are made of 100C6 chrome steel. It is greased with a white grease.

Chambrelan is specialized in the design and manufacturing of telescopic slides and rails for industrial applications: reinforced slides, linear slide bearings rail, bearings guide, steel, aluminum or stainless steel sliders, partial, full or over extension, heavy duty industrial drawers...

Greasings

  • Standard slides are delivered slightly greased. We use a high pressure bearing grease for steel slides and a white grease for aluminum and stainless slides. Upon request, we can use food grease (compatible clean room) a high temperature grease a teflon free grease (for spray booths...) grease free mounting (although we do not advise this option)

A food safe grease, combined with stainless steel ball bearings, offers a cheap alternative to stainless steel slides.

Options

Manual lock

D402V - lock opened: when extended, push the lock to close the slider.

D402F - lock closed: when closed, push the lock to open the slider.

D402VF - lock opened and closed: when extended, push the lock to close the slider, when closed, push the lock to open the slider.

In most cases, only one locking slide is required for the locking of the drawer to be achieved.

When mounting in vehicles, we invite you to contact us if you plan to use locking slides.

the presence of lock and latches makes some shorter lengths impossible to manufacture. Moreover some standard holes may not be present.

we do not recommend locking options for use in vertically mounted (guillotine) applications.

Double extension

D402DD - the slide opens from both sides. This can be used for transfer hatches.

The double extension option is incompatible with any locking system.

Disconnect

D46 - the inner beam can be removed and reintroduced into its slideway. This option can be useful in cases of difficult assembly conditions or applications requiring external maintenance.

Surface treatment

This slide can be supplied with a hard anodization coating, which offers, in addition to corrosion resistance, an increased resistance to hammering of ball bearings. This option can be usefull in the case of applications subject to vibrations.

hard anodizing is not recommended with locks in opened position.

Stainless stell ball bearings mounting

It can be mounted with stainless steel balls to get a very good corrosion resistance, which in some cases can provide an economical alternative to stainless steel slides.

high temp use
  • We do not recommend using this product outside the standard temperature range.
Development changes

The extension of this slide cannot be modified on stock items. On request, we can produce the requested extension. Please allow a production lead time.

increased development reduces the maximum permissible load.

Vertical mounting

This slide can be mounted vertically (guillotine).

Drilling scheme

Download

Standard closed lengths

The characteristics given on this website correspond to standard manufacture or usual requirements. Our position as a manufacturer enables us to offer great flexibility in order to meet the most specific requirements.

MeasuresLoadsClosed lengthExtensionLoad per pair
on major axis
Load on minor axisStockPlease select
Longueur replié
150
Extension
70
Load on minor axis
6
Load per pair on major axis
13
1507013630
Longueur replié
200
Extension
120
Load on minor axis
9
Load per pair on major axis
16
200120169218
Longueur replié
250
Extension
160
Load on minor axis
11
Load per pair on major axis
20
2501602011250
Longueur replié
300
Extension
180
Load on minor axis
13
Load per pair on major axis
26
30018026137
Longueur replié
350
Extension
230
Load on minor axis
14
Load per pair on major axis
30
350230301444
Longueur replié
400
Extension
280
Load on minor axis
14
Load per pair on major axis
32
4002803214--
Longueur replié
450
Extension
300
Load on minor axis
13
Load per pair on major axis
33
450300331313
Longueur replié
500
Extension
330
Load on minor axis
13
Load per pair on major axis
33
500330331314
Longueur replié
550
Extension
350
Load on minor axis
12
Load per pair on major axis
31
550350311215
Longueur replié
600
Extension
400
Load on minor axis
10
Load per pair on major axis
28
60040028103
Longueur replié
650
Extension
450
Load on minor axis
8
Load per pair on major axis
25
6504502583

A question?

Contact us for more information

Copyright 2017 CHAMBRELAN - Legal terms - Sitemap