This Reinforced 3 beam stainless steel telescopic slide, offers a full extension.
Very strong, it includes reinforced ball bearings to improve its load capacity and resistance to torque loads.
It is intended for very heavy loads in applications requiring a very strong slide.
The guide rail is very strong, both in terms of its cold drawn hardened profiles and its stops that are equipped with spring-dampers when closing and opening. It is intended for drawers carrying very heavy loads. It can be used for transfer hatch. Being equipped with reinforcing ball bearings, it may also be flat mounted. Remember that a flat mounting induce significant deflection.
Recommended operating temperatures from -20 to 80°C. After modifications during manufacturing, we can go from -50 to 250°C.
Mounting on a minor axis: Increased risk of friction between beams during operation. A flat mounting will create significant deflection. Increase space between the beams through spacers not supplied, in order to avoid the scraping due to the deflection.
This product can be used as a telescopic leg, battery drawer slide, cabinet slide, guide rail for telescopic gangway, furniture or tooling slideway bars, telescopic table, overhead rail, heavy load slide-drawer, horizontal guide.
Chambrelan produces this telescopic slide using hot laminated stainless steel profiles with a cold drawn finish.
Standard coating is electropolishing.
It is equipped with plastic shock stops.
It has ball cages made of stainless steel.
Its ball bearings are made of stainless steel. It is greased with a white grease.
Chambrelan is specialized in the design and manufacturing of telescopic slides and rails for industrial applications: reinforced slides, linear slide bearings rail, bearings guide, steel, aluminum or stainless steel sliders, partial, full or over extension, heavy duty industrial drawers...
- Standard slides are delivered slightly greased. We use a high pressure bearing grease for steel slides and a white grease for aluminum and stainless slides. Upon request, we can use food grease (compatible clean room) a high temperature grease a teflon free grease (for spray booths...) grease free mounting (although we do not advise this option)
It has no lock option so far.
high temp use
- Use in high temperature (furnace): This model can be used in high temperatures environments: up to 250°C. However, adjustments are necessary: - Additionnal play in the assembly to allow the expansion elements without blocking the slide - Use of high temperature grease - Removing of all plastic parts. These adjustments on the slides should be performed in the factory, it is important to warn us with price request or order and to allow a delay for manufacturig.
the extension of this model can be decreased or increased up to 10%.
increased development reduces the maximum permissible load.
This slide can be mounted vertically. However, to avoid jamming, it is necessary to install, during production, additional stoppers to relocate the ball cages. It is therefore necessary to specify the type of installation requirements: downward or upward movement.
Standard closed lengths
The characteristics given on this website correspond to standard manufacture or usual requirements. Our position as a manufacturer enables us to offer great flexibility in order to meet the most specific requirements.
This model has equivalent models, whose overall dimensions and the diagrams of drillings are close or identical