E1020

This Reinforced 3 beam zinc plated steel telescopic slide, offers a full extension.

  • Extension : 500 mm
  • Load on minor axis : 950 kg
  • Load on major axis : Nous contacter

Option

Pictures


3D


Option :

Description

This Reinforced 3 beam zinc plated steel telescopic slide, offers a full extension.

It includes a synchronisation device to allow a sequential opening of the beams, which reduces the moving forces. Caution: It is imperative to observe the direction of assembly between the fixed and movable sliders.

Very strong, it includes reinforced ball bearings to improve its load capacity and resistance to torque loads.

It is intended for very heavy loads in applications requiring a very strong slide.

Applications

The guide rail is very strong, both in terms of its cold drawn hardened profiles and its stops that are equipped with spring-dampers when closing and opening. It is intended for drawers carrying very heavy loads. It can be used for transfer hatch. Being equipped with reinforcing ball bearings, it may also be flat mounted. Remember that a flat mounting induce significant deflection.

Recommended operating temperatures from -20 to 80°C. After modifications during manufacturing, we can go from -50 to 250°C.

Mounting on a minor axis: Increased risk of friction between beams during operation. A flat mounting will create significant deflection. Increase space between the beams through spacers not supplied, in order to avoid the scraping due to the deflection.

This product can be used as a telescopic leg, battery drawer slide, cabinet slide, guide rail for telescopic gangway, furniture or tooling slideway bars, telescopic table, overhead rail, heavy load slide-drawer, horizontal guide.

Manufacture

Chambrelan produces this telescopic slide using hot laminated steel profiles with a cold drawn finish.

Anti-corrosion standard coating is a silver zinc, of a 12 microns average thickness, which offers excellent resistance to the salt spray test.

It is equipped with spring shock stops.

It has ball cages made of zinc plated steel.

Its ball bearings are made of 100C6 chrome steel. It is greased with a high pressure grease.

Chambrelan is specialized in the design and manufacturing of telescopic slides and rails for industrial applications: reinforced slides, linear slide bearings rail, bearings guide, steel, aluminum or stainless steel sliders, partial, full or over extension, heavy duty industrial drawers...

Greasings

  • Standard slides are delivered slightly greased. We use a high pressure bearing grease for steel slides and a white grease for aluminum and stainless slides. Upon request, we can use food grease (compatible clean room) a high temperature grease a teflon free grease (for spray booths...) grease free mounting (although we do not advise this option)

A food safe grease, combined with stainless steel ball bearings, offers a cheap alternative to stainless steel slides.

Options

Manual lock

It has no lock option so far.

Surface treatment

Other treatments ensuring better corrosion resistance are also available. Do not hesitate to contact us.

A nitruration coating can be supplied, which offers, in addition to corrosion resistance, an increased resistance to hammering of ball bearings and a longer lifespan. This option can be usefull in the case of intensive use or applications subject to vibrations.

Stainless stell ball bearings mounting

It can be mounted with stainless steel balls to get a very good corrosion resistance, which in some cases can provide an economical alternative to stainless steel slides.

high temp use
  • Use in high temperature (furnace): This model can be used in high temperatures environments: up to 250°C. However, adjustments are necessary: - Additionnal play in the assembly to allow the expansion elements without blocking the slide - Use of high temperature grease - Removing of all plastic parts. These adjustments on the slides should be performed in the factory, it is important to warn us with price request or order and to allow a delay for manufacturig.

the zinc coating deteriorates above 120°C, we can offer other solutions.

Development changes

the extension of this model can be decreased or increased up to 10%.

increased development reduces the maximum permissible load.

Vertical mounting

This slide can be mounted vertically. However, to avoid jamming, it is necessary to install, during production, additional stoppers to relocate the ball cages. It is therefore necessary to specify the type of installation requirements: downward or upward movement.

Drilling scheme

Download

Standard closed lengths

The characteristics given on this website correspond to standard manufacture or usual requirements. Our position as a manufacturer enables us to offer great flexibility in order to meet the most specific requirements.

MeasuresLoadsClosed lengthExtensionLoad per pair
on major axis
Load on minor axisStockPlease select
Longueur replié
500
Extension
500
Load on minor axis
Nous contacter
Load per pair on major axis
950
500500950Contact us--
Longueur replié
550
Extension
550
Load on minor axis
Nous contacter
Load per pair on major axis
1000
5505501000Contact us--
Longueur replié
600
Extension
600
Load on minor axis
Nous contacter
Load per pair on major axis
1050
6006001050Contact us--
Longueur replié
650
Extension
650
Load on minor axis
Nous contacter
Load per pair on major axis
1100
6506501100Contact us--
Longueur replié
700
Extension
700
Load on minor axis
Nous contacter
Load per pair on major axis
1150
7007001150Contact us--
Longueur replié
750
Extension
750
Load on minor axis
Nous contacter
Load per pair on major axis
1200
7507501200Contact us--
Longueur replié
800
Extension
800
Load on minor axis
Nous contacter
Load per pair on major axis
1250
8008001250Contact us--
Longueur replié
850
Extension
850
Load on minor axis
Nous contacter
Load per pair on major axis
1200
8508501200Contact us--
Longueur replié
900
Extension
900
Load on minor axis
Nous contacter
Load per pair on major axis
1150
9009001150Contact us--
Longueur replié
1000
Extension
1000
Load on minor axis
Nous contacter
Load per pair on major axis
1100
100010001100Contact us--
Longueur replié
1100
Extension
1100
Load on minor axis
Nous contacter
Load per pair on major axis
1050
110011001050Contact us--
Longueur replié
1200
Extension
1200
Load on minor axis
Nous contacter
Load per pair on major axis
1000
120012001000Contact us--
Longueur replié
1300
Extension
1300
Load on minor axis
Nous contacter
Load per pair on major axis
950
13001300950Contact us--
Longueur replié
1400
Extension
1400
Load on minor axis
Nous contacter
Load per pair on major axis
900
14001400900Contact us--
Longueur replié
1500
Extension
1500
Load on minor axis
Nous contacter
Load per pair on major axis
850
15001500850Contact us--
Longueur replié
1600
Extension
1600
Load on minor axis
Nous contacter
Load per pair on major axis
800
16001600800Contact us--
Longueur replié
1700
Extension
1700
Load on minor axis
Nous contacter
Load per pair on major axis
750
17001700750Contact us--
Longueur replié
1800
Extension
1800
Load on minor axis
Nous contacter
Load per pair on major axis
700
18001800700Contact us--
Longueur replié
1900
Extension
1900
Load on minor axis
Nous contacter
Load per pair on major axis
650
19001900650Contact us--
Longueur replié
2000
Extension
2000
Load on minor axis
Nous contacter
Load per pair on major axis
600
20002000600Contact us--

Same models

This model has equivalent models, whose overall dimensions and the diagrams of drillings are close or identical

    A question?

    Contact us for more information

    Copyright 2017 CHAMBRELAN - Legal terms - Sitemap