E1014

This Reinforced 4 beam zinc plated steel telescopic slide, offers an over extension. Very strong, it includes reinforced ball bearings to improve its load capacity and resistance to torque loads. It is intended for very heavy loads in applications requiring a very strong slide.

  • Extension : 750 mm
  • Load on minor axis : 350 kg
  • Load on major axis : 60 kg

Option

Pictures


3D


Option :

Description

This Reinforced 4 beam zinc plated steel telescopic slide, offers an over extension.

Very strong, it includes reinforced ball bearings to improve its load capacity and resistance to torque loads.

It is intended for very heavy loads in applications requiring a very strong slide.

Applications

The guide rail is very strong, both in terms of its cold drawn hardened profiles and its end stops. It is intended for applications of heavy loads drawers or to withstand hard use. Being equipped with reinforcing ball bearings, it may also be flat mounted. Remember that a flat mounting induce significant deflection.

Recommended operating temperatures from -20 to 80°C. After modifications during manufacturing, we can go from -50 to 250°C.

Mounting on a minor axis: Increased risk of friction between beams during operation. A flat mounting will create significant deflection. Increase space between the beams through spacers not supplied, in order to avoid the scraping due to the deflection.

This product can be used as a telescopic leg, battery drawer slide, cabinet slide, guide rail for telescopic gangway, furniture or tooling slideway bars, telescopic table, overhead rail, heavy load slide-drawer, horizontal guide.

Manufacture

Chambrelan produces this telescopic slide using hot laminated steel profiles with a cold drawn finish.

Anti-corrosion standard coating is a silver zinc, of a 12 microns average thickness, which offers excellent resistance to the salt spray test.

It is equipped with spring shock stops.

It has ball cages made of zinc plated steel.

Its ball bearings are made of 100C6 chrome steel. It is greased with a high pressure grease.

Chambrelan is specialized in the design and manufacturing of telescopic slides and rails for industrial applications: reinforced slides, linear slide bearings rail, bearings guide, steel, aluminum or stainless steel sliders, partial, full or over extension, heavy duty industrial drawers...

Greasings

  • Standard slides are delivered slightly greased. We use a high pressure bearing grease for steel slides and a white grease for aluminum and stainless slides. Upon request, we can use food grease (compatible clean room) a high temperature grease a teflon free grease (for spray booths...) grease free mounting (although we do not advise this option)

A food safe grease, combined with stainless steel ball bearings, offers a cheap alternative to stainless steel slides.

Options

Manual lock

It has no lock option so far.

Surface treatment

Other treatments ensuring better corrosion resistance are also available. Do not hesitate to contact us.

A nitruration coating can be supplied, which offers, in addition to corrosion resistance, an increased resistance to hammering of ball bearings and a longer lifespan. This option can be usefull in the case of intensive use or applications subject to vibrations.

Stainless stell ball bearings mounting

It can be mounted with stainless steel balls to get a very good corrosion resistance, which in some cases can provide an economical alternative to stainless steel slides.

high temp use
  • Use in high temperature (furnace): This model can be used in high temperatures environments: up to 250°C. However, adjustments are necessary: - Additionnal play in the assembly to allow the expansion elements without blocking the slide - Use of high temperature grease - Removing of all plastic parts. These adjustments on the slides should be performed in the factory, it is important to warn us with price request or order and to allow a delay for manufacturig.

the zinc coating deteriorates above 120°C, we can offer other solutions.

Development changes

the extension of this model can be decreased or increased up to 10%.

increased development reduces the maximum permissible load.

Vertical mounting

This slide can be mounted vertically. However, to avoid jamming, it is necessary to install, during production, additional stoppers to relocate the ball cages. It is therefore necessary to specify the type of installation requirements: downward or upward movement.

Drilling scheme

Download

Standard closed lengths

The characteristics given on this website correspond to standard manufacture or usual requirements. Our position as a manufacturer enables us to offer great flexibility in order to meet the most specific requirements.

MeasuresLoadsClosed lengthExtensionLoad per pair
on major axis
Load on minor axisStockPlease select
Longueur replié
500
Extension
750
Load on minor axis
60
Load per pair on major axis
350
500750350600
Longueur replié
550
Extension
825
Load on minor axis
70
Load per pair on major axis
375
550825375700
Longueur replié
600
Extension
900
Load on minor axis
70
Load per pair on major axis
400
600900400700
Longueur replié
650
Extension
975
Load on minor axis
80
Load per pair on major axis
425
650975425800
Longueur replié
700
Extension
1050
Load on minor axis
80
Load per pair on major axis
450
7001050450800
Longueur replié
750
Extension
1125
Load on minor axis
90
Load per pair on major axis
475
7501125475900
Longueur replié
800
Extension
1200
Load on minor axis
90
Load per pair on major axis
500
8001200500900
Longueur replié
850
Extension
1275
Load on minor axis
90
Load per pair on major axis
475
8501275475900
Longueur replié
900
Extension
1350
Load on minor axis
80
Load per pair on major axis
450
9001350450800
Longueur replié
1000
Extension
1500
Load on minor axis
70
Load per pair on major axis
400
10001500400700
Longueur replié
1100
Extension
1650
Load on minor axis
70
Load per pair on major axis
375
11001650375700
Longueur replié
1200
Extension
1800
Load on minor axis
60
Load per pair on major axis
350
12001800350601
Longueur replié
1300
Extension
1950
Load on minor axis
60
Load per pair on major axis
325
13001950325600
Longueur replié
1400
Extension
2100
Load on minor axis
60
Load per pair on major axis
300
14002100300600
Longueur replié
1500
Extension
2250
Load on minor axis
50
Load per pair on major axis
275
15002250275500
Longueur replié
1600
Extension
2400
Load on minor axis
50
Load per pair on major axis
250
16002400250500
Longueur replié
1700
Extension
2550
Load on minor axis
40
Load per pair on major axis
225
17002550225400
Longueur replié
1800
Extension
2700
Load on minor axis
40
Load per pair on major axis
200
18002700200400
Longueur replié
1900
Extension
2850
Load on minor axis
30
Load per pair on major axis
175
19002850175300
Longueur replié
2000
Extension
3000
Load on minor axis
30
Load per pair on major axis
150
20003000150302

A question?

Contact us for more information

Copyright 2017 CHAMBRELAN - Legal terms - Sitemap