R71

This reinforced 2 beas zinc plated steel telescopic slide, offers a partial extension.

  • Extension : 80 mm
  • Load on minor axis : 140 kg
  • Load on major axis : 115 kg

Option

Pictures


3D


Option :

Description

This reinforced 2 beas zinc plated steel telescopic slide, offers a partial extension.

Strong, it encloses reinforced ball bearings that restricts twisting of the beams.

It is intended for heavy loads in applications requiring high strength slides.

Applications

The guide rail is very strong, both in terms of its cold drawn hardened profiles and its end stops. It is intended for applications of heavy loads drawers or to withstand hard use. Being equipped with reinforcing ball bearings, it may also be flat mounted. Remember that a flat mounting induce significant deflection.

Recommended operating temperatures from -20 to 80°C. After modifications during manufacturing, we can go from -50 to 250°C.

This product can be used as average load drawer slides, machine guard guides, telescopic rod, bar or arm, generator slide, furniture slide, extendable table slide rail, horizontal suspended guidance or in some cases as in vertical guides.

Manufacture

Chambrelan produces this telescopic slide using cold drawn profiles.

Anti-corrosion standard coating is a silver zinc, of a 12 microns average thickness, which offers excellent resistance to the salt spray test.

It has straight stops when opening and closing.

It has ball cages made of galvanized steel.

Its ball bearings are made of 100C6 chrome steel. It is greased with a high pressure grease.

Chambrelan is specialized in the design and manufacturing of telescopic slides and rails for industrial applications: reinforced slides, linear slide bearings rail, bearings guide, steel, aluminum or stainless steel sliders, partial, full or over extension, heavy duty industrial drawers...

Greasings

  • Standard slides are delivered slightly greased. We use a high pressure bearing grease for steel slides and a white grease for aluminum and stainless slides. Upon request, we can use food grease (compatible clean room) a high temperature grease a teflon free grease (for spray booths...) grease free mounting (although we do not advise this option)

A food safe grease, combined with stainless steel ball bearings, offers a cheap alternative to stainless steel slides.

Options

Manual lock

R71V - lock opened: when extended, push the lock to close the slider.

R71F - lock closed: when closed, push the lock to open the slider.

R71VF - lock opened and closed: when extended, push the lock to close the slider, when closed, push the lock to open the slider.

In most cases, only one locking slide is required for the locking of the drawer to be achieved.

When mounting in vehicles, we invite you to contact us if you plan to use locking slides.

the presence of lock and latches makes some shorter lengths impossible to manufacture. Moreover some standard holes may not be present.

we do not recommend locking options for use in vertically mounted (guillotine) applications.

Double extension

R71DD - the slide opens from both sides. This can be used for transfer hatches.

Surface treatment

Other treatments ensuring better corrosion resistance are also available. Do not hesitate to contact us.

A nitruration coating can be supplied, which offers, in addition to corrosion resistance, an increased resistance to hammering of ball bearings and a longer lifespan. This option can be usefull in the case of intensive use or applications subject to vibrations.

Stainless stell ball bearings mounting

It can be mounted with stainless steel balls to get a very good corrosion resistance, which in some cases can provide an economical alternative to stainless steel slides.

high temp use
  • Use in high temperature (furnace): This model can be used in high temperatures environments: up to 250°C. However, adjustments are necessary: - Additionnal play in the assembly to allow the expansion elements without blocking the slide - Use of high temperature grease - Removing of all plastic parts. These adjustments on the slides should be performed in the factory, it is important to warn us with price request or order and to allow a delay for manufacturig.

the zinc coating deteriorates above 120°C, we can offer other solutions.

Development changes

the extension of this model can be decreased or increased up to 10%.

increased development reduces the maximum permissible load.

Vertical mounting

This slide can be mounted vertically. However, to avoid jamming, it is necessary to install, during production, additional stoppers to relocate the ball cages. It is therefore necessary to specify the type of installation requirements: downward or upward movement.

Drilling scheme

Download

Standard closed lengths

The characteristics given on this website correspond to standard manufacture or usual requirements. Our position as a manufacturer enables us to offer great flexibility in order to meet the most specific requirements.

MeasuresLoadsClosed lengthExtensionLoad per pair
on major axis
Load on minor axisStockPlease select
Longueur replié
200
Extension
80
Load on minor axis
115
Load per pair on major axis
140
200801401156
Longueur replié
250
Extension
130
Load on minor axis
120
Load per pair on major axis
140
250130140120--
Longueur replié
300
Extension
180
Load on minor axis
122
Load per pair on major axis
140
3001801401226
Longueur replié
350
Extension
230
Load on minor axis
120
Load per pair on major axis
140
35023014012028
Longueur replié
400
Extension
280
Load on minor axis
116
Load per pair on major axis
140
40028014011612
Longueur replié
450
Extension
310
Load on minor axis
113
Load per pair on major axis
175
45031017511361
Longueur replié
500
Extension
340
Load on minor axis
108
Load per pair on major axis
210
50034021010814
Longueur replié
550
Extension
370
Load on minor axis
104
Load per pair on major axis
245
5503702451048
Longueur replié
600
Extension
400
Load on minor axis
100
Load per pair on major axis
280
600400280100--
Longueur replié
650
Extension
430
Load on minor axis
96
Load per pair on major axis
278
6504302789610
Longueur replié
700
Extension
480
Load on minor axis
92
Load per pair on major axis
270
700480270923
Longueur replié
750
Extension
510
Load on minor axis
90
Load per pair on major axis
260
7505102609013
Longueur replié
800
Extension
540
Load on minor axis
87
Load per pair on major axis
250
8005402508726
Longueur replié
850
Extension
570
Load on minor axis
84
Load per pair on major axis
238
850570238846
Longueur replié
900
Extension
600
Load on minor axis
81
Load per pair on major axis
224
9006002248117
Longueur replié
1000
Extension
680
Load on minor axis
75
Load per pair on major axis
200
1000680200752
Longueur replié
1100
Extension
740
Load on minor axis
68
Load per pair on major axis
180
1100740180688
Longueur replié
1200
Extension
800
Load on minor axis
58
Load per pair on major axis
160
1200800160583
Longueur replié
1300
Extension
880
Load on minor axis
49
Load per pair on major axis
140
130088014049--
Longueur replié
1400
Extension
940
Load on minor axis
40
Load per pair on major axis
120
140094012040--
Longueur replié
1500
Extension
1020
Load on minor axis
30
Load per pair on major axis
98
150010209830--
Longueur replié
1600
Extension
1080
Load on minor axis
21
Load per pair on major axis
74
160010807421--
Longueur replié
1700
Extension
1140
Load on minor axis
10
Load per pair on major axis
50
170011405010--

A question?

Contact us for more information

Copyright 2017 CHAMBRELAN - Legal terms - Sitemap