RA5R

This Reinforced 3 beam zinc plated steel telescopic slide, offers a full extension.

  • Extension : 275 mm
  • Load on minor axis : 140 kg
  • Load on major axis : 67 kg

Option

Pictures


3D


Option :

Description

This Reinforced 3 beam zinc plated steel telescopic slide, offers a full extension.

Strong, it encloses reinforced ball bearings that restricts twisting of the beams.

It is intended for heavy loads in applications requiring high strength slides.

Applications

The guide rail is very strong, both in terms of its cold drawn hardened profiles and its end stops. It is intended for applications of heavy loads drawers or to withstand hard use. Being equipped with reinforcing ball bearings, it may also be flat mounted. Remember that a flat mounting induce significant deflection.

Recommended operating temperatures from -20 to 80°C. After modifications during manufacturing, we can go from -50 to 250°C.

This product can be used as average load drawer slides, machine guard guides, telescopic rod, bar or arm, generator slide, furniture slide, extendable table slide rail, horizontal suspended guidance or in some cases as in vertical guides.

Manufacture

Chambrelan produces this telescopic slide using cold drawn profiles.

Anti-corrosion standard coating is a silver zinc, of a 12 microns average thickness, which offers excellent resistance to the salt spray test.

It has straight stops when opening and closing.

It has ball cages made of galvanized steel.

Its ball bearings are made of 100C6 chrome steel. It is greased with a high pressure grease.

Chambrelan is specialized in the design and manufacturing of telescopic slides and rails for industrial applications: reinforced slides, linear slide bearings rail, bearings guide, steel, aluminum or stainless steel sliders, partial, full or over extension, heavy duty industrial drawers...

Greasings

  • Standard slides are delivered slightly greased. We use a high pressure bearing grease for steel slides and a white grease for aluminum and stainless slides. Upon request, we can use food grease (compatible clean room) a high temperature grease a teflon free grease (for spray booths...) grease free mounting (although we do not advise this option)

A food safe grease, combined with stainless steel ball bearings, offers a cheap alternative to stainless steel slides.

Options

Manual lock

RA5V - lock opened: when extended, push the lock to close the slider.

RA5F - lock closed: when closed, push the lock to open the slider.

RA5VF - lock opened and closed: when extended, push the lock to close the slider, when closed, push the lock to open the slider.

In most cases, only one locking slide is required for the locking of the drawer to be achieved.

When mounting in vehicles, we invite you to contact us if you plan to use locking slides.

the presence of lock and latches makes some shorter lengths impossible to manufacture. Moreover some standard holes may not be present.

we do not recommend locking options for use in vertically mounted (guillotine) applications.

Double extension

RA5DD - the slide opens from both sides. This can be used for transfer hatches.

The double extension option is incompatible with any locking system.

Surface treatment

Other treatments ensuring better corrosion resistance are also available. Do not hesitate to contact us.

A nitruration coating can be supplied, which offers, in addition to corrosion resistance, an increased resistance to hammering of ball bearings and a longer lifespan. This option can be usefull in the case of intensive use or applications subject to vibrations.

Stainless stell ball bearings mounting

It can be mounted with stainless steel balls to get a very good corrosion resistance, which in some cases can provide an economical alternative to stainless steel slides.

high temp use
  • Use in high temperature (furnace): This model can be used in high temperatures environments: up to 250°C. However, adjustments are necessary: - Additionnal play in the assembly to allow the expansion elements without blocking the slide - Use of high temperature grease - Removing of all plastic parts. These adjustments on the slides should be performed in the factory, it is important to warn us with price request or order and to allow a delay for manufacturig.

the zinc coating deteriorates above 120°C, we can offer other solutions.

Development changes

the extension of this model can be decreased or increased up to 10%.

increased development reduces the maximum permissible load.

Vertical mounting

This slide can be mounted vertically. However, to avoid jamming, it is necessary to install, during production, additional stoppers to relocate the ball cages. It is therefore necessary to specify the type of installation requirements: downward or upward movement.

Drilling scheme

Download

Standard closed lengths

The characteristics given on this website correspond to standard manufacture or usual requirements. Our position as a manufacturer enables us to offer great flexibility in order to meet the most specific requirements.

MeasuresLoadsClosed lengthExtensionLoad per pair
on major axis
Load on minor axisStockPlease select
Longueur replié
250
Extension
275
Load on minor axis
67
Load per pair on major axis
140
2502751406714
Longueur replié
300
Extension
315
Load on minor axis
60
Load per pair on major axis
150
3003151506097
Longueur replié
350
Extension
375
Load on minor axis
53
Load per pair on major axis
159
3503751595350
Longueur replié
400
Extension
415
Load on minor axis
48
Load per pair on major axis
166
400415166485
Longueur replié
450
Extension
475
Load on minor axis
43
Load per pair on major axis
170
45047517043280
Longueur replié
500
Extension
515
Load on minor axis
40
Load per pair on major axis
174
50051517440171
Longueur replié
550
Extension
575
Load on minor axis
36
Load per pair on major axis
176
55057517636221
Longueur replié
600
Extension
615
Load on minor axis
33
Load per pair on major axis
175
60061517533165
Longueur replié
650
Extension
675
Load on minor axis
29
Load per pair on major axis
174
65067517429116
Longueur replié
700
Extension
715
Load on minor axis
27
Load per pair on major axis
172
70071517227332
Longueur replié
750
Extension
775
Load on minor axis
25
Load per pair on major axis
168
75077516825811
Longueur replié
800
Extension
815
Load on minor axis
23
Load per pair on major axis
164
80081516423103
Longueur replié
850
Extension
875
Load on minor axis
22
Load per pair on major axis
158
85087515822115
Longueur replié
900
Extension
915
Load on minor axis
21
Load per pair on major axis
151
9009151512110
Longueur replié
1000
Extension
1015
Load on minor axis
18
Load per pair on major axis
136
100010151361853
Longueur replié
1100
Extension
1115
Load on minor axis
15
Load per pair on major axis
118
110011151181581
Longueur replié
1200
Extension
1215
Load on minor axis
13
Load per pair on major axis
98
12001215981347
Longueur replié
1300
Extension
1315
Load on minor axis
11
Load per pair on major axis
78
1300131578115
Longueur replié
1400
Extension
1415
Load on minor axis
8
Load per pair on major axis
58
1400141558812
Longueur replié
1500
Extension
1515
Load on minor axis
Nous contacter
Load per pair on major axis
38
1500151538Contact us6
Longueur replié
1600
Extension
1615
Load on minor axis
Nous contacter
Load per pair on major axis
20
1600161520Contact us14

A question?

Contact us for more information

Copyright 2017 CHAMBRELAN - Legal terms - Sitemap