E1908

This Reinforced 3 beam stainless steel telescopic slide, offers a full extension. Very strong, it includes reinforced ball bearings to improve its load capacity and resistance to torque loads. It is intended for very heavy loads in applications requiring a very strong slide.

  • Extension : 500 mm
  • Load on minor axis : 570 kg
  • Load on major axis : 250 kg

Option

Pictures


3D


Option :

Description

This Reinforced 3 beam stainless steel telescopic slide, offers a full extension.

Very strong, it includes reinforced ball bearings to improve its load capacity and resistance to torque loads.

It is intended for very heavy loads in applications requiring a very strong slide.

Applications

The guide rail is very strong, both in terms of its cold drawn hardened profiles and its stops that are equipped with spring-dampers when closing and opening. It is intended for drawers carrying very heavy loads. It can be used for transfer hatch. Being equipped with reinforcing ball bearings, it may also be flat mounted. Remember that a flat mounting induce significant deflection.

Recommended operating temperatures from -20 to 80°C. After modifications during manufacturing, we can go from -50 to 250°C.

Mounting on a minor axis: Increased risk of friction between beams during operation. A flat mounting will create significant deflection. Increase space between the beams through spacers not supplied, in order to avoid the scraping due to the deflection.

This product can be used as a telescopic leg, battery drawer slide, cabinet slide, guide rail for telescopic gangway, furniture or tooling slideway bars, telescopic table, overhead rail, heavy load slide-drawer, horizontal guide.

Manufacture

Chambrelan produces this telescopic slide using hot laminated stainless steel profiles with a cold drawn finish.

Standard coating is electropolishing.

It is equipped with plastic shock stops.

It has ball cages made of stainless steel.

Its ball bearings are made of stainless steel. It is greased with a white grease.

Chambrelan is specialized in the design and manufacturing of telescopic slides and rails for industrial applications: reinforced slides, linear slide bearings rail, bearings guide, steel, aluminum or stainless steel sliders, partial, full or over extension, heavy duty industrial drawers...

Greasings

  • Standard slides are delivered slightly greased. We use a high pressure bearing grease for steel slides and a white grease for aluminum and stainless slides. Upon request, we can use food grease (compatible clean room) a high temperature grease a teflon free grease (for spray booths...) grease free mounting (although we do not advise this option)

Options

Manual lock

It has no lock option so far.

high temp use
  • Use in high temperature (furnace): This model can be used in high temperatures environments: up to 250°C. However, adjustments are necessary: - Additionnal play in the assembly to allow the expansion elements without blocking the slide - Use of high temperature grease - Removing of all plastic parts. These adjustments on the slides should be performed in the factory, it is important to warn us with price request or order and to allow a delay for manufacturig.
Development changes

the extension of this model can be decreased or increased up to 10%.

increased development reduces the maximum permissible load.

Vertical mounting

This slide can be mounted vertically. However, to avoid jamming, it is necessary to install, during production, additional stoppers to relocate the ball cages. It is therefore necessary to specify the type of installation requirements: downward or upward movement.

Drilling scheme

Download

Standard closed lengths

The characteristics given on this website correspond to standard manufacture or usual requirements. Our position as a manufacturer enables us to offer great flexibility in order to meet the most specific requirements.

MeasuresLoadsClosed lengthExtensionLoad per pair
on major axis
Load on minor axisStockPlease select
Longueur replié
500
Extension
500
Load on minor axis
250
Load per pair on major axis
570
5005005702500
Longueur replié
550
Extension
550
Load on minor axis
245
Load per pair on major axis
605
5505506052450
Longueur replié
600
Extension
600
Load on minor axis
240
Load per pair on major axis
640
6006006402400
Longueur replié
650
Extension
650
Load on minor axis
235
Load per pair on major axis
670
6506506702350
Longueur replié
700
Extension
700
Load on minor axis
230
Load per pair on major axis
695
7007006952300
Longueur replié
750
Extension
750
Load on minor axis
225
Load per pair on major axis
720
7507507202250
Longueur replié
800
Extension
800
Load on minor axis
220
Load per pair on major axis
740
8008007402200
Longueur replié
850
Extension
850
Load on minor axis
215
Load per pair on major axis
755
8508507552150
Longueur replié
900
Extension
900
Load on minor axis
210
Load per pair on major axis
770
9009007702100
Longueur replié
1000
Extension
1000
Load on minor axis
200
Load per pair on major axis
785
100010007852000
Longueur replié
1100
Extension
1100
Load on minor axis
185
Load per pair on major axis
782
110011007821850
Longueur replié
1200
Extension
1200
Load on minor axis
175
Load per pair on major axis
770
120012007701750
Longueur replié
1300
Extension
1300
Load on minor axis
165
Load per pair on major axis
745
130013007451650
Longueur replié
1400
Extension
1400
Load on minor axis
150
Load per pair on major axis
705
140014007051500
Longueur replié
1500
Extension
1500
Load on minor axis
140
Load per pair on major axis
660
150015006601400
Longueur replié
1600
Extension
1600
Load on minor axis
125
Load per pair on major axis
600
160016006001250
Longueur replié
1700
Extension
1700
Load on minor axis
110
Load per pair on major axis
530
170017005301100
Longueur replié
1800
Extension
1800
Load on minor axis
95
Load per pair on major axis
455
18001800455950
Longueur replié
1900
Extension
1900
Load on minor axis
75
Load per pair on major axis
380
19001900380750
Longueur replié
2000
Extension
2000
Load on minor axis
60
Load per pair on major axis
300
20002000300600

Same models

This model has equivalent models, whose overall dimensions and the diagrams of drillings are close or identical

A question?

Contact us for more information

Copyright 2017 CHAMBRELAN - Legal terms - Sitemap