ST508

This Reinforced 3 beam stainless steel telescopic slide, offers a full extension. Strong, it encloses reinforced ball bearings that restricts twisting of the beams. It is intended for heavy loads in applications requiring a very strong slide.

  • Extension : 275 mm
  • Load on minor axis : 140 kg
  • Load on major axis : 67 kg

Option

Pictures


3D


Option :

Description

This Reinforced 3 beam stainless steel telescopic slide, offers a full extension.

Strong, it encloses reinforced ball bearings that restricts twisting of the beams.

It is intended for heavy loads in applications requiring a very strong slide.

Applications

The guide rail is very strong, both in terms of its cold drawn hardened profiles and its end stops. It is intended for applications of heavy loads drawers or to withstand hard use. Being equipped with reinforcing ball bearings, it may also be flat mounted. Remember that a flat mounting induce significant deflection.

Recommended operating temperatures from -20 to 80°C. After modifications during manufacturing, we can go from -50 to 250°C.

This product can be used as average load drawer slides, machine guard guides, telescopic rod, bar or arm, generator slide, furniture slide, extendable table slide rail, horizontal suspended guidance or in some cases as in vertical guides.

Manufacture

Chambrelan produces this telescopic slide using cold drawn stainless steel profiles.

Standard coating is electropolishing.

It has straight stops when opening and closing.

It has ball cages made of stainless steel.

Its ball bearings are made of stainless steel. It is greased with a white grease.

Chambrelan is specialized in the design and manufacturing of telescopic slides and rails for industrial applications: reinforced slides, linear slide bearings rail, bearings guide, steel, aluminum or stainless steel sliders, partial, full or over extension, heavy duty industrial drawers...

Greasings

  • Standard slides are delivered slightly greased. We use a high pressure bearing grease for steel slides and a white grease for aluminum and stainless slides. Upon request, we can use food grease (compatible clean room) a high temperature grease a teflon free grease (for spray booths...) grease free mounting (although we do not advise this option)

Options

Manual lock

ST508V - lock opened: when extended, push the lock to close the slider.

ST508F - lock closed: when closed, push the lock to open the slider.

ST508VF - lock opened and closed: when extended, push the lock to close the slider, when closed, push the lock to open the slider.

In most cases, only one locking slide is required for the locking of the drawer to be achieved.

When mounting in vehicles, we invite you to contact us if you plan to use locking slides.

the presence of lock and latches makes some shorter lengths impossible to manufacture. Moreover some standard holes may not be present.

we do not recommend locking options for use in vertically mounted (guillotine) applications.

Double extension

ST508DD - the slide opens from both sides. This can be used for transfer hatches.

The double extension option is incompatible with any locking system.

high temp use
  • Use in high temperature (furnace): This model can be used in high temperatures environments: up to 250°C. However, adjustments are necessary: - Additionnal play in the assembly to allow the expansion elements without blocking the slide - Use of high temperature grease - Removing of all plastic parts. These adjustments on the slides should be performed in the factory, it is important to warn us with price request or order and to allow a delay for manufacturig.
Development changes

the extension of this model can be decreased or increased up to 10%.

increased development reduces the maximum permissible load.

Vertical mounting

This slide can be mounted vertically. However, to avoid jamming, it is necessary to install, during production, additional stoppers to relocate the ball cages. It is therefore necessary to specify the type of installation requirements: downward or upward movement.

Drilling scheme

Download

Standard closed lengths

The characteristics given on this website correspond to standard manufacture or usual requirements. Our position as a manufacturer enables us to offer great flexibility in order to meet the most specific requirements.

MeasuresLoadsClosed lengthExtensionLoad per pair
on major axis
Load on minor axisStockPlease select
Longueur replié
250
Extension
275
Load on minor axis
67
Load per pair on major axis
140
250275140670
Longueur replié
300
Extension
315
Load on minor axis
60
Load per pair on major axis
150
300315150605
Longueur replié
350
Extension
375
Load on minor axis
53
Load per pair on major axis
159
350375159530
Longueur replié
400
Extension
415
Load on minor axis
48
Load per pair on major axis
166
400415166480
Longueur replié
450
Extension
475
Load on minor axis
43
Load per pair on major axis
170
4504751704314
Longueur replié
500
Extension
515
Load on minor axis
40
Load per pair on major axis
174
5005151744023
Longueur replié
550
Extension
575
Load on minor axis
36
Load per pair on major axis
176
550575176360
Longueur replié
600
Extension
615
Load on minor axis
33
Load per pair on major axis
175
600615175330
Longueur replié
650
Extension
675
Load on minor axis
29
Load per pair on major axis
174
650675174294
Longueur replié
700
Extension
715
Load on minor axis
27
Load per pair on major axis
172
700715172279
Longueur replié
750
Extension
775
Load on minor axis
25
Load per pair on major axis
168
750775168252
Longueur replié
800
Extension
815
Load on minor axis
23
Load per pair on major axis
164
800815164236
Longueur replié
850
Extension
875
Load on minor axis
22
Load per pair on major axis
158
8508751582210
Longueur replié
900
Extension
915
Load on minor axis
21
Load per pair on major axis
151
900915151214
Longueur replié
1000
Extension
1015
Load on minor axis
18
Load per pair on major axis
136
100010151361812
Longueur replié
1100
Extension
1115
Load on minor axis
15
Load per pair on major axis
118
11001115118150
Longueur replié
1200
Extension
1215
Load on minor axis
13
Load per pair on major axis
98
1200121598130
Longueur replié
1300
Extension
1315
Load on minor axis
11
Load per pair on major axis
78
1300131578112
Longueur replié
1400
Extension
1415
Load on minor axis
8
Load per pair on major axis
58
140014155880
Longueur replié
1500
Extension
1515
Load on minor axis
Nous contacter
Load per pair on major axis
38
1500151538Contact us4
Longueur replié
1600
Extension
1615
Load on minor axis
Nous contacter
Load per pair on major axis
20
1600161520Contact us0

A question?

Contact us for more information

Copyright 2017 CHAMBRELAN - Legal terms - Sitemap