An overview in 8 points

Our range of ball bearing telescopic slides is designed for industrial applications.

As a manufacturer for more than 60 years, we have a deep understanding of slide issues.


Load capacity and longer lengths

With nearly a hundred types of slides available, our range of sliding systems covers a wide range of requirements from a few kilos to more than one ton.

Closed lengths range from 150mm up to 2000mm with extensions from 100mm to 3000mm!

Extensions

Our range of ball bearing telescopic slides is composed of 3 large families of slides with either 2, 3 or 4 beams to respond to all demands of different industrial drawer slides applications. The extension is dependent on the closed length.

Materials

Telescopic tracks are made of 3 main types of material; steel, aluminium, stainless steel; Chambrelan drawer runners come with a surface treatment depending on the material.

Options

Locking devices Standard slides come with stoppers but no locking devices.

Some locking drawer slides offer up to 3 different locks: - Lock out (positive lock), that locks the drawer in the extended position. - Lock in, that locks the drawer in the closed position. - Lock in & out

Slam lock can also be considered as a more ergonomic use.

Double extension slides For drawers that need to be reached on each side of the cabinet, a double extension system can be adapted on 2 or 3 beam telescopic drawer slides. DD slam lock handle offers a turnkey solution to this kind of system, to lock the drawer in the centre position.

Detachable sliders For maintenance purposes, or for easy install drawers, slides might have to be detached (and reattached for operation).

Surface treatments

Chambelan drawer runners come with a surface treatment depending on the material. All our treatments are RoHS and REACH compliant.

- zinc plated steel for carbon steel telescopic slides for standard application. - anodized aluminium for aluminium drawer slides. - stainless steel on our stainless steel telescopic slides for corrosive environment or specific applications.

The standard treatments are suitable for the majority of uses. Other or additional treatments (hardness for example) may be performed according to the needs of the application.

Mountings

3 types of mounting for our drawer tracks:

- Side mounting drawer sliders Sliding rails are designed to be set on the side of the sliding system. When it comes to heavy duty or extra heavy duty sliders, side mounting is necessary. - Bottom mounting extension slides drawer For a simplified installation, slides can be used bottom mounted (i.e. under the drawer, as an undermount drawer runner). We suggest to select our reinforced telescopic sliders for bottom mounted drawer slides. It is also possible to use them as centre mount drawer slides. - Vertical mounting gliders (up & down use) Screens or protection panels can move vertically, either upwards, or downwards. Some standard telescopic slides are recommended for this type of use. Some other rails can be adapted to this type of mounting

Easy to integrate, easy to install

You can find within our catalogue comprehensive data to allow a good and simple installation: load capacity, length, drilling scheme...

Moreover, on the website, you can find our product, including 3D, in every standard CAD format

Reduced maintenance

Chambrelan slides have been designed to operate with a minimum maintenance in the most challenging of environments.

Only under extreme conditions of use will they require some complementary maintenance.

Partial extensions

A 2 beams slide offers a partial extension, a portion of the moving beam has to remain within the fixed beam.


Total extensions

A slide with 3 beams that offers a total extension, the additional intermediate beam increases the possible extension


Over extensions

A 4 beams slide offers an over- extension (150% or more of the closed length) thanks to the 2 intermediate beams.



Guide Selector

Loading...


Copyright 2017 CHAMBRELAN - Legal terms - Sitemap